My first two attempts to print with this filament didn't go well, but I printed a Benchy with it with no major issues after those two massive failures, so I'm not sure if it was an issue with the model I was trying to print (a flexi Weedle from Pokemon) or if it was this filament. The head of the Weedle would not adhere to the bed and kept turning into spaghetti. There was one string coming off the base of the Benchy I printed with this filament but other than that it looked good, so I'm leaning towards maybe an issue with the Weedle model or the Anycubic slicer. I printed on a Kobra X (without using the ACE 2 Pro) and it worked well enough on the third try with a known good model (Benchy). I will continue to try and work with this filament; the Weedle was the first thing I wanted to print that this beige filament was the appropriate color for but that didn't work out, obviously.

Great filament, packaged well, spooled well, printed flawlessly. Would reccomend.

I want to start off saying that once the roll didn't have any issues and completed a print it turned out pretty nice.This particular filament did have some issues with breaking, we had to keep restarting this test print because the filament kept breaking as it was feeding. There was nothing wrong with the way it was wound so this wasn't a tangling issue.. I just think this is a little brittle. We are using this straight out of the package and it's doing this. Now we have it in a dry box which is what we did immediately after opening and so as we bluefin using it it broke several times as it fed. So it's probably not the most flexible filament, which is good but also I think is the reason to for the breakage. Once it got going we didn't have an issue though.So no jamming or tangling happened, and it did print well once it went. We've been using the same settings and same print for each filament we test now to give it a good try. So in all fairness the print came out pretty nice, I noticed when the print is printing at spots with overhang it seems a bit more rigid like it's not as even. This was something that was absent with other filaments but it's not bad enough for me to dock points off this one. A small bit of sanding with remove the imperfections.It's pretty strong though as a printed design, the color is very solid and can be used for a variety of design applications. It's not a bad filament and the color is nice, however you may run into a little bit of breakage with this one.

Packaging is sturdy, came as expected in vacuum sealed bag. Spool worked in AMS without an issue and the print quality was great. Nice to buy US made product. The blue parts of the print in the photo are dancyn filament.

Beautiful color and prints nicely

Wonderful filament! The color is so pretty and the print quality is amazing! Had no issues since I’ve been using this product!

Perfect bright pink!! My favorite Pink filament, thats saying something because I am obsessed with Pink. Quality of print is great.

I love the bright color!! Prints vert smooth. Quick delivery

Unusual color but ill find a filament.

Nice and BRIGHT green filament. Great for Halloween and Day of the Dead prints.

Great colors, hot pink is exactly what i needed. This one is indeed HOT. Perfect, thank you!!

I printed several parts with this filament and had no issues with print quality. The spool was neatly wound, fed smoothly through my printer, and produced consistent results with good layer adhesion. Surface finish came out clean and there was very little stringing.My only complaint is the color. It is advertised as gold, but in person it looks much more like a brownish orange than a true gold. It is not a bad looking color, just different from what I expected when ordering gold filament.Aside from the color mismatch, the filament performed well and printed as reliably as the major brands I normally use. If the color works for your project, it is a solid choice.

This filament absolutely earns a 5 star review from me. It hits that rare sweet spot where material quality, print performance, and price all line up in a way that makes it easy to recommend.I ordered this beige PLA specifically for practical prints and more detailed parts, and it has been very impressive in actual use. The spool is neatly wound, feeds smoothly, and the diameter is clearly well controlled, which shows in the way extrusion stays consistent over longer jobs. Layers fuse together with a clean, even look, so finished pieces feel solid in the hand instead of fragile or chalky.From a craftsmanship standpoint, you can tell some care went into how this filament is made. The strand feels uniform rather than lumpy or rough, which helps avoid random blobs and surface defects while printing. First-layer adhesion has been reliable, and once a print gets going, it runs without drama: no surprise clogs, no weird under-extrusion bands, just steady output and tidy walls.The beige color works especially well for functional parts, organizers, and anything that benefits from a neutral tone. It gives prints a clean, professional look, which makes it easier to use them in real projects instead of just prototypes. Surface finish is smooth enough that light sanding and a bit of cleanup is all that’s needed if you want a more refined, “finished product” feel.Value for the money is where this filament really stands out. The price sits right in the middle of the pack, but the performance feels closer to what I expect from more premium brands. Between the consistent extrusion, dependable adhesion, and solid final parts, you’re getting a spool that behaves like a workhorse rather than something you reserve for experiments. The fact that it is made in the USA adds a nice bonus, especially if you care about supporting domestic manufacturing without paying a luxury surcharge.In short, this is the kind of filament that makes you feel comfortable queuing up bigger or more important prints because you know what you’re going to get. If you want dependable PLA with a neutral color, good craftsmanship, and a fair price, this spool is an easy yes.

​I was able to get some really great results with this filament, but it did require a little preparation upfront. After putting it through a drying cycle and running some calibration tests, it started printing beautifully without any issues or feeding hiccups. My only real complaint is with the color itself. If you are expecting a bright, metallic gold, you might be a bit disappointed, as it leans much closer to a warm mustard yellow. Aside from the color variance, it is a highly reliable filament that gets the job done well.

The color is really nice. It prints really well this pool is nice and neat. I didn’t have any tangles the first couple of prints that I use it on. No adhesion issues each layer line stuck fairly well. Print quality was what I expected to be it’s only as good as the settings that you have. I would definitely buy another role of this. I just wish Moore manufacturers used cardboard instead of plastic.

I picked up this PLA filament to be used in a Bambu Lab P2S via AMS 2 Pro. The first thing that caught my eye was the unusual color. The package arrived in the normal vacuum sealed package with a silica pack. I like that this filament makes use of plastic spools rather than the cheap cardboard ones that break down over time. The filament felt like the many other popular brands on the market. I measured 3 different spots on the spool, and the average thickness was 1.74mm. The first thing I did was manually enter what material and recommended temperatures that the manufacturer recommends (190-220C) on the AMS. I printed my usual Benchy to test the speed and quality while using both a .4 and a .6 nozzle. The print quality was consistent and produced smooth layers throughout the entire test print. The filament fed through my AMS and printer easily and maintained a very stable extrusion with almost no stringing that I could see using the settings that were recommended by the manufacturer. Bending it slightly back and forth did crack pretty easily but, it doesn't feel excessively brittle. Bed adhesion was strong and consistent from the start of the print job until the end. Overall, this PLA filament was easy to use and is equivalent to other brands out there. The color looks sharp and is not a common color.

Such a pretty color. Have not run into any problems using this on 3D prints.

This is one top notch filament ran great looks even better. I will 100% be buying more

I tried this company on a whim after years of using the major brands, and it works just a well as the major brands. It came out shiny and smooth. Packaging was clean and very well labeled just like the other brands. I am using an old Prusa printer and it handled this filament like a champ from bed adhesion, overhangs, and removing supports. I bought this emerald green because it is a nice looking color for my project. I am very happy with the parts that came off for the tank I am building. I would buy again!

Love this color. Printed very well on my A1

Mostly great. Had bubbles in the first few feet so it appeared to be too wet. Dried it out and it performed a lot like Bambu PLA does. Compared it side by side with Bambu and it did have more moisture content. I think dry this stuff out a bit more and it will be a top performer.

The black PLA filament arrived very quickly and was packaged securely. The spool was vacuum sealed and ready to use right out of the box, which I always appreciate.Printing with this filament was smooth and reliable from start to finish. The black color is deep and consistent, producing clean prints with excellent layer adhesion and a nice finish. I experienced minimal stringing and no clogging issues, and the filament was wound neatly on the spool for trouble-free printing.Overall, this is a great product with fast shipping and excellent print quality. I’m very happy with the results and would definitely purchase this black filament again.

Great quality at a great price.

Products are made in the USA and a superior in quality compared to more expensive brands but thats what youre going to get from Dancyn. Love the youtube channel and was blown away by the filament!

Great local filament. Cant waitvto try it out. Done sith China!!

Excellent filament, love the color variety. Will now be using exclusively for our business. Excited to work with another NJ business making great products.

Excellent filament, love the color variety. Will now be using exclusively for our business. Excited to work with another NJ business making great products.

My first two attempts to print with this filament didn't go well, but I printed a Benchy with it with no major issues after those two massive failures, so I'm not sure if it was an issue with the model I was trying to print (a flexi Weedle from Pokemon) or if it was this filament. The head of the Weedle would not adhere to the bed and kept turning into spaghetti. There was one string coming off the base of the Benchy I printed with this filament but other than that it looked good, so I'm leaning towards maybe an issue with the Weedle model or the Anycubic slicer. I printed on a Kobra X (without using the ACE 2 Pro) and it worked well enough on the third try with a known good model (Benchy). I will continue to try and work with this filament; the Weedle was the first thing I wanted to print that this beige filament was the appropriate color for but that didn't work out, obviously.

Great filament, packaged well, spooled well, printed flawlessly. Would reccomend.

I want to start off saying that once the roll didn't have any issues and completed a print it turned out pretty nice.This particular filament did have some issues with breaking, we had to keep restarting this test print because the filament kept breaking as it was feeding. There was nothing wrong with the way it was wound so this wasn't a tangling issue.. I just think this is a little brittle. We are using this straight out of the package and it's doing this. Now we have it in a dry box which is what we did immediately after opening and so as we bluefin using it it broke several times as it fed. So it's probably not the most flexible filament, which is good but also I think is the reason to for the breakage. Once it got going we didn't have an issue though.So no jamming or tangling happened, and it did print well once it went. We've been using the same settings and same print for each filament we test now to give it a good try. So in all fairness the print came out pretty nice, I noticed when the print is printing at spots with overhang it seems a bit more rigid like it's not as even. This was something that was absent with other filaments but it's not bad enough for me to dock points off this one. A small bit of sanding with remove the imperfections.It's pretty strong though as a printed design, the color is very solid and can be used for a variety of design applications. It's not a bad filament and the color is nice, however you may run into a little bit of breakage with this one.

Packaging is sturdy, came as expected in vacuum sealed bag. Spool worked in AMS without an issue and the print quality was great. Nice to buy US made product. The blue parts of the print in the photo are dancyn filament.

Beautiful color and prints nicely

Wonderful filament! The color is so pretty and the print quality is amazing! Had no issues since I’ve been using this product!

Perfect bright pink!! My favorite Pink filament, thats saying something because I am obsessed with Pink. Quality of print is great.

I love the bright color!! Prints vert smooth. Quick delivery

Unusual color but ill find a filament.

Nice and BRIGHT green filament. Great for Halloween and Day of the Dead prints.

Great colors, hot pink is exactly what i needed. This one is indeed HOT. Perfect, thank you!!

I printed several parts with this filament and had no issues with print quality. The spool was neatly wound, fed smoothly through my printer, and produced consistent results with good layer adhesion. Surface finish came out clean and there was very little stringing.My only complaint is the color. It is advertised as gold, but in person it looks much more like a brownish orange than a true gold. It is not a bad looking color, just different from what I expected when ordering gold filament.Aside from the color mismatch, the filament performed well and printed as reliably as the major brands I normally use. If the color works for your project, it is a solid choice.

This filament absolutely earns a 5 star review from me. It hits that rare sweet spot where material quality, print performance, and price all line up in a way that makes it easy to recommend.I ordered this beige PLA specifically for practical prints and more detailed parts, and it has been very impressive in actual use. The spool is neatly wound, feeds smoothly, and the diameter is clearly well controlled, which shows in the way extrusion stays consistent over longer jobs. Layers fuse together with a clean, even look, so finished pieces feel solid in the hand instead of fragile or chalky.From a craftsmanship standpoint, you can tell some care went into how this filament is made. The strand feels uniform rather than lumpy or rough, which helps avoid random blobs and surface defects while printing. First-layer adhesion has been reliable, and once a print gets going, it runs without drama: no surprise clogs, no weird under-extrusion bands, just steady output and tidy walls.The beige color works especially well for functional parts, organizers, and anything that benefits from a neutral tone. It gives prints a clean, professional look, which makes it easier to use them in real projects instead of just prototypes. Surface finish is smooth enough that light sanding and a bit of cleanup is all that’s needed if you want a more refined, “finished product” feel.Value for the money is where this filament really stands out. The price sits right in the middle of the pack, but the performance feels closer to what I expect from more premium brands. Between the consistent extrusion, dependable adhesion, and solid final parts, you’re getting a spool that behaves like a workhorse rather than something you reserve for experiments. The fact that it is made in the USA adds a nice bonus, especially if you care about supporting domestic manufacturing without paying a luxury surcharge.In short, this is the kind of filament that makes you feel comfortable queuing up bigger or more important prints because you know what you’re going to get. If you want dependable PLA with a neutral color, good craftsmanship, and a fair price, this spool is an easy yes.

​I was able to get some really great results with this filament, but it did require a little preparation upfront. After putting it through a drying cycle and running some calibration tests, it started printing beautifully without any issues or feeding hiccups. My only real complaint is with the color itself. If you are expecting a bright, metallic gold, you might be a bit disappointed, as it leans much closer to a warm mustard yellow. Aside from the color variance, it is a highly reliable filament that gets the job done well.

The color is really nice. It prints really well this pool is nice and neat. I didn’t have any tangles the first couple of prints that I use it on. No adhesion issues each layer line stuck fairly well. Print quality was what I expected to be it’s only as good as the settings that you have. I would definitely buy another role of this. I just wish Moore manufacturers used cardboard instead of plastic.

I picked up this PLA filament to be used in a Bambu Lab P2S via AMS 2 Pro. The first thing that caught my eye was the unusual color. The package arrived in the normal vacuum sealed package with a silica pack. I like that this filament makes use of plastic spools rather than the cheap cardboard ones that break down over time. The filament felt like the many other popular brands on the market. I measured 3 different spots on the spool, and the average thickness was 1.74mm. The first thing I did was manually enter what material and recommended temperatures that the manufacturer recommends (190-220C) on the AMS. I printed my usual Benchy to test the speed and quality while using both a .4 and a .6 nozzle. The print quality was consistent and produced smooth layers throughout the entire test print. The filament fed through my AMS and printer easily and maintained a very stable extrusion with almost no stringing that I could see using the settings that were recommended by the manufacturer. Bending it slightly back and forth did crack pretty easily but, it doesn't feel excessively brittle. Bed adhesion was strong and consistent from the start of the print job until the end. Overall, this PLA filament was easy to use and is equivalent to other brands out there. The color looks sharp and is not a common color.

Such a pretty color. Have not run into any problems using this on 3D prints.

This is one top notch filament ran great looks even better. I will 100% be buying more

I tried this company on a whim after years of using the major brands, and it works just a well as the major brands. It came out shiny and smooth. Packaging was clean and very well labeled just like the other brands. I am using an old Prusa printer and it handled this filament like a champ from bed adhesion, overhangs, and removing supports. I bought this emerald green because it is a nice looking color for my project. I am very happy with the parts that came off for the tank I am building. I would buy again!

Love this color. Printed very well on my A1

Mostly great. Had bubbles in the first few feet so it appeared to be too wet. Dried it out and it performed a lot like Bambu PLA does. Compared it side by side with Bambu and it did have more moisture content. I think dry this stuff out a bit more and it will be a top performer.

The black PLA filament arrived very quickly and was packaged securely. The spool was vacuum sealed and ready to use right out of the box, which I always appreciate.Printing with this filament was smooth and reliable from start to finish. The black color is deep and consistent, producing clean prints with excellent layer adhesion and a nice finish. I experienced minimal stringing and no clogging issues, and the filament was wound neatly on the spool for trouble-free printing.Overall, this is a great product with fast shipping and excellent print quality. I’m very happy with the results and would definitely purchase this black filament again.

Great quality at a great price.

Products are made in the USA and a superior in quality compared to more expensive brands but thats what youre going to get from Dancyn. Love the youtube channel and was blown away by the filament!

Great local filament. Cant waitvto try it out. Done sith China!!

Excellent filament, love the color variety. Will now be using exclusively for our business. Excited to work with another NJ business making great products.

Excellent filament, love the color variety. Will now be using exclusively for our business. Excited to work with another NJ business making great products.